Aerokits 40" P.T. Boat restoration

Von dbninja 2 Einträge 27 Dez 2010 — 31 Dez 2010
1Gefällt-mir-Angaben
2Kommentare
0 Follower
Kapitel 02 / 02

Kapitel · 2 · zum Lesen scrollen

new addition to the fleet

well, time for a new blog! just been and picked up (210 mile round trip) another ebay find,
a model I have been after for quite a while, an Aerokits P.T. Boat. its in pretty good shape and has most of its original fittings and even has all four torpedoes, will be replacing the running gear and fitting radio and a slightly smaller rudder!!!

watch this space

David
dbninja Eröffnungsbeitrag 1

Aerokits 40" P.T. Boat restoration

started the strip down, as usual things aren't quite as good as they first looked, the propshaft, rudder, and scoop are set way too far aft. the shaft has been fixed In position with a pool of fibreglass and resin which fills the bay where the propshaft enters the hull about an Inch deep at the keel.
I may have to just cut out the old shaft with the angle grinder.. the old running gear has now been removed, the motor which still works Is manufactured by "Jaky" Its quite a sturdy piece of kit but not one I am familiar with. I don't think I will bother with the batteries either..
the boat has definately had a Diesel fitted at some time In Its early life, you can see the hole In the transom for the exhaust, and I can smell that "old diesel" smell now I have disturbed everything.
twin shafts and twin graupner 600's or twin enya 19's still not made my mind up.

David
Gefällt von RNinMunich

Delete this post?

Es wird von der Seite entfernt.

Diesen Entwurf verwerfen?

Ihr Entwurf wird gelöscht und kann nicht wiederhergestellt werden.

Sie haben einen unvollendeten Entwurf

Was möchten Sie damit tun?