fitting props in correct rotation

Gestartet von Muskrat
5 Antworties 3 gefällts Letzte Aktivität: vor 4 Jahren
#6

fitting props in correct rotation

Thanks Peejay, That is what i thought so i will have to swap the motor leads over because i have no gears fitted. I will give that ago on the water and see how she performs

Cheers Jon
j a Easter.
Gefällt von Peejay
#5

fitting props in correct rotation

Is one of the motors geared to give opposite rotation? Left and right props must turn in opposite rotation. It seems that the prop with the larger wash is turning correctly, and the other must turn in the opposite direction by reversing the motor leads or using a gearbox.
So many ships . . . and so little time . . .
Gefällt von Len1
#4

fitting props in correct rotation

Thanks Trev , That is how i fitted them and the motors all running in same direction but the boat gives out a load of wash from the rear so i am guessing the rotation is incorrect.
j a Easter.
#3

fitting props in correct rotation

Hi I am having problems with the running of my Fairmile, i was suppled with two left hand props and two right hand props, can somebody tell me were to fit the props and should the props contra rotate.

Cheers Jon
j a Easter.
#1

fitting props in correct rotation

Hi, I am having problems with the running of my Fairmile, I was supplied with four brushed motors for this boat with two left hand and two right hand props. I am unsure which prop should were and should the props contra rotate.

Cheers Jon.
j a Easter.
Gefällt von pressonreguardless

Anmelden zu diesem Thread beizutragen.

Delete this post?

Es wird von der Seite entfernt.

Diesen Entwurf verwerfen?

Ihr Entwurf wird gelöscht und kann nicht wiederhergestellt werden.

Sie haben einen unvollendeten Entwurf

Was möchten Sie damit tun?