smoke unit

Gestartet von Stephen T vor 5 Monaten

4 Antworties 15 gefällts 0 Follower Letzte Aktivität: vor 5 Monaten

#5 vor 5 Monaten 12

Have you seen this one from Denes Design, had a good write up in Model Boats, also have a look on YouTube
https://www.denesdesign.co.uk

That's all right, Mr Ryan. My Morse is so rusty, I could be sending him dimensions on Playmate of the Month.

Gefällt von hermank

#4 vor 5 Monaten 19

@Wolle
Hi,
I'm also considering a smoke unit for my new model. As you can see, it smokes quite well. I saw an interesting idea somewhere in an old magazine that interrupts the straight stream of smoke so that it doesn't blow straight up.
A thread is stretched across the top of the chimney, to which a piece of fine paper is glued (a paper flap - about half the size of the chimney diameter). As the smoke comes out, the paper vibrates and interrupts the stream of smoke...
Tom

Main principle: if it is not broken - don't repair It!

Gefällt von hermank and Rookysailor and

#3 vor 5 Monaten 37

I bought these. I installed them in my Britannia.

https://ebay.us/m/zr4jPO

Gefällt von hermank and Rookysailor and

#2 vor 5 Monaten 40

@Stephen T
Send a PM to Blackshoe he has a big tug and will be able to assist.

Gefällt von hermank

#1 vor 5 Monaten 41

smoke unit

I need a smoke unit for my big tug I need something that produces a fair bit of smoke the hang long one docent any ideas I see you people over the pond use one that produces a fair bit of smoke

Stephen james tucker

Gefällt von tomarack and hermank and

Anmelden zu diesem Thread beizutragen.

MODEL BOATS WEBSITE

smoke unit

smoke unit