Model quality.

Gestartet von ColRay
4 Antworties 2 gefällts 0 Follower Letzte Aktivität: vor 3 Monaten
#5 28
Hello Geezer Iwill check out my local Bunnings store, these day's it's like an Aladdin's cave
#4 30
@ColRay I bought several types of head-mounted magnifying glasses to trial them. I found the most useful ones to be the type EdW has shown, with a sheet of magnifying plastic about 3-4 inches wide. These focus at a far enough distance to let you work.

The other types - jewelers loupes and magnifying camers - need to be held right up against the work. Fine for examining microscopic detail - not so good for working.

If you can find one, the types which allow two magnifying sheets to be hung in front of your eyes offer a wider range of magnification...
Gefällt von ColRay
#3 34
Hi Ed I did purchase a pair of glasses on eBay should have multy focal lengths , ended up as only one very very strong, I guess the white part has led lights Col.
#2 39
Been using one like this for modelling and electronic work for a while now, no complaints. The problem with a camera and PC is getting used to the relationship between the screen and your hands as they are not aligned.
Ed
Gefällt von ColRay
#1 39

Model quality.

Model quality.

Downloading images of the Bluebird I noticed a few quality issues eg a loss of fine detail and rough edges.

One of the problems is age related failing eye sight , it started several years when I suffered an eye injury , then two years ago I had corrective eye surgery , for everyday going about things my sight as spot-on at 83 I still drive a 6 speed manual car without any problems so it isn't all bad, it's just close up work model making that is of concern.

I purchased a magnifying / stand from the local hardware store as much use as lamb chop at a vegan bar-b-q.

I have been told about a small high powered camera that usb / computer for live magnified viewing .

Anyone had any experience of this type of camera ? Col.

Anmelden zu diesem Thread beizutragen.

Delete this post?

Es wird von der Seite entfernt.

Diesen Entwurf verwerfen?

Ihr Entwurf wird gelöscht und kann nicht wiederhergestellt werden.

Sie haben einen unvollendeten Entwurf

Was möchten Sie damit tun?