I know NOTHING about hobby plywood!!!
I know NOTHING about hobby plywood!!!
Hi Most of the kits you buy have either 6, 4, 2, 1, mm ply. 6 mm for keel, frames, 4mm for super structure, 2mm decks, 1mm for curved parts. Thickness will depend on size of boat the ones I mentioned will be OK for up to 1000mm. Birchply won't warp good for cutting. I hope this help. Ps 3/8 ply about 9mm.
I know NOTHING about hobby plywood!!!
As I said in an earlier post I want to try plywood for a keep and framing. I think 3/8 is the depth of the material I want, you RC folks use sturdier material that I use, so any suggestions on what to look for and please be specific, unfamiliar with plywood jargon. Thanks
Craft Plywood 3/8 x 6 x 12 (3)
This is a Package of 3 Micro-Cut Baltic Birch Craft Plywood Sheets (3/8") by Midwest Products Company.
Midwest Craft Plywood 3/8 x 6 x 12 (3)
Craft Plywood 3/8 x 6 x 12 (3)
This is a Package of 3 Micro-Cut Baltic Birch Craft Plywood Sheets (3/8") by Midwest Products Company.
Midwest Craft Plywood 3/8 x 6 x 12 (3)
TS
Gefällt von
Wird geladen…