This very large Vosper RTTL was active at the Oxford Model Boat Club open day on the 7th July. At aprox 6 feet long, it is the work of Terry Gregory (hull and electronics) and Paul Izzard( superstructure). It is a spectacular performer and beautifully finished though the enormous wake means that it is normally run solo on the water.

Greetings from Germany! I've been out of the net for a while and rebuilding this boat with a totally new superstructure, paint job and electronics. I obtained the fiberglass hull measuring 24.5 X 9 inches from a California fellow via E-bay. Formerly a 45-footer Chris Craft at 1:24 scale, this updated vessel was inspired on a 1970s 30-footer Chris Craft Tournament Fisherman and on 1970s 28 and 33-footer Bertram boats. 😁 The Chris Craft in the attached picture from an early days brochure was the very only Chris Craft utilizing a Deep-Vee hull. The story goes that they apparently copied their boat following the lines of a Bertram 28 based on famed boat designer Ray Hunt. Bertram sued in court and Chris Craft ended up building less than 200 boats of this type. After all, the Chris Craft vessel ended up being better than the Bertram in terms of cabin space and overall value. Highly cherished within the American sports fishing community, many of these boats are still up and running.

Sailing on the pond at the former Canterbury Golf Club, Port Perry, Ontario, Canada 🇨🇦

This is a Mini-12 Sailboat designed for sailing in weedy ponds. The rudder is attached to its shorter keel and weighs 12lbs+, and 42" length. it uses the Soling mast and sail area.

I am still learning how to handle this boat but it is sure fun!

My grandson Michael helped me build this kit last winter. We had fun researching existing tug boats of the era, and upgrading some of the details. After the bath tub test, I changed from direct drive to a 3:1 ratio motor to keep it running at a scale speed.

Original 1960s boat aquired this summer from the family a deceased former club member in scruffy, non running but basically sound condition. Was petrol powered at some stage and still had original vintage mechanical speed controller from a later electric power set up. Restored with two (secondhand) MFA850 motors in tandem driving a new single 20 in M5 shaft. . Using a 50 Amp Tornado speed control and plastic X55 Graupner prop.

Sprayed (Volvo) Flash Green Metallic with orginal decks stripped back and restained (using tea bags!) and relaquered

Planing gently on our club sailing water at Knightcote, Warwickshire on 25 October

This was originally built circa 1960 by my Uncle, with no radio control, you set the rudder, and let it go! it was then powered by an IC engine. All the fittings, engine and electrics where removed in 1965(ish) for conversion to electric, but the project was scrapped and everything was lost.

After a number of years carrying Action-Man around the living room, it was condemned to 30 years in the loft. Restoration started 3 years ago, completed after 1 year and given back to my Father as a Xmas present.

Sadly, he never got to use it much and it's now back in my possession. After 6 months or so (see posts!) sorting a better motor/esc/battery combo, it's ready for another restoration to bring it back to former glory.

Look closely on the 3rd picture, in the background you can see Fort Perch Rock Lighthouse, a listed building which stands at the entrance to the Mersey, and the famous Liverpool Waterfront further down river. New Brighton lake is in a fabulous setting for boat enthusiasts.