Well, after the lovely reception of my HMCS Snowberry - which has been in the wars after a collision, now repaired and upgraded - now with a smoker and lighting - I chanced upon another 1/72 Revell Corvette, so taking everything I had learned in making Snowberry, I thought I would apply myself and see what I could do for a sister ship - the part-built kit - an eBay find - came with a few options for the decals, one of which was HMS Campanula, so the task was set!

Campanula has some differences to Snowberry, a diferent radar tower, different bridge supports - 2 x beams instead of 3 - different layout to the carley floats, an extra flagstaff on the funnel and a diferent bandstand edging for the rear pompom, so some scratchbuilding to fashion the diferences, as well as replacing a few missing parts.

The pics show it as it arrived, then the scratchbuilt carley float supports, the whaleboat runout on the davits, the bandstand alteration, the upgraded front gun, flota nets, navi and interior lights and an overview of the progress...

I am hoping to have her finished this week, and the crew painted and affixed, ready for her maiden voyage at Bury Lido next Sunday, fingers crossed!

Anyhows, hope you like her!

Stunning weather most model boaters would be jealous of. Warm, but not hot! Very gentle breeze. No rain! But not many showed up. Wait 'till the summer comes" No complaints about it being too hot for model boats!

Anyway, I wanted to get back to my trawler with another video. This time on board with my old GoPro. Had some issues with the battery packs slipping inside the hull. I'm going to remove the one for the lighting as I don't use them anyway. Then I will add some fixed ballast in the bottom. The video with the camera (and waterproof housing) on the top of the pilot house made the boat heel quite a bit. Going to try for some more on board videos in the near future on my other boats.

Got the 4 minute YouTube link here:
I hope you enjoy it!

Lew

I

After about 6yrs of the model being 'laid up', I thought it was about time to get it back in 'survey' again, and get some better videos with new camera. Checked it over, cleaned the smoke system (glycerin mixture had separated) oiled everything up and off to the pond. Ran as well as ever and everything still worked which was pleasing.

For those who missed the build blog way back, the model is 36", glass over strip planked balsa, has twin 28mm 2000kv inrunners with twin 60A car escs, twin GT Power sound units, a smoke and water exhaust system (developed by myself and Graham 96, -which he and Mike Turpin successfully fitted to their excellent fireboats) and lighting. Uses 2 -2s 2200mah LiPos for the motors, and an 1800mah 2s LiPo for the air and water pumps.

Boat was shipped to the RNZAF in 1940 and was eventually sold to a private owner in the late 50s. It is still around in Auckland after suffering 3 major modifications to the coamings, and is now fully airconditioned, and can be operated from an I Pad. Today powered with a Detroit 8V96 in place of twin Grey Marine (Detroit) 671s, which replaced the 3 original Napier sea lions. Did 38knts with the 3 Napiers, (1500hp) and does 22knots today with a single 500hp Detroit. It was the only one of the 22 built to be sold in the southern hemisphere. The only other one running is HSL 102 in the UK

I have been on board once in 1968 when it was still in original form, and then again 50yrs later in its' present form.

JB

Just answering a question about the club run at night & yes some guys go overboard with lighting hope I can photo some of the more exotic lighted model boats. Here is my Gumboot Cloggeroo lobster model boat with a few lights . That name is a song by Stompin Tom Connors a Canadian song writer .

Did this lighting a while back LED's

Our club has a "Parade of Boats" day every June. Club members bring boats to display, and there are scheduled events throughout the day. A lot of locals bring their lawn chairs and spend the day enjoying our boats. The two floating lighthouses are used during our two "Lighthouse Day" events, which go until dark so we can display our boat lighting.

Out for a "chilled" afternoon with the "Wee Nip" - testing various camera settings and filming techniques from the camera boat under various lighting conditions.

She is a bit tender as the 12V battery makes her top heavy. If I lay it down she is bow heavy...will sort that out I redid the wiring and lighting

Hi. This is my 2nd scratch built boat since lock down began. The first was the H S L 103 finished 6/7 weeks ago. Still waiting to be tested outside of workshop. This one is built on a fibre glass hull,and has a length of 44 inches and a beam of 16. My power plant is twin out runner motors purple power. 600kv, running through twin 70 amp ESC and with 4 cell 5000 amp lipos feeding them. All accommodation is made using 6 mm three ply. And every fitting you see on the boat was scratch built by me. Lighting system is 12 v grain of wheat .props are three bladed brass 45 mm by prop shop

The first trial of my Aeronaut Pilot Boat. The trial went very well. The evening lighting video is on the build blog.

Boat is Scratch built 36" British Power Boat 64ft High Speed ASR Launch which belonged to the RNZAF. The launch was one of the 22 built and was shipped to NZ in 1940. it was the only one of its type in the Southern Hemisphere. Model has twin motors, ESCs, sound units etc. Has remotely switched water pump for water cooled brushless 2000kv in runner motors and remotely switched lighting. Uses 2x 2200mah 2s LiPos for drive and 1 1800mah LiPo for the pump (also a separate battery for the LED lights. Boat is built with strip planked balsa on ply frame and fiber glassed. Deck is ply, wheelhouse is varnished balsa. The colour is as it was for most of its time in the RNZAF . Took about 5 years on and off to build and finished it last year. (please ignore the time date - can't get rid of it .