Suchergebnisse

36 posts · Seite 1 of 3
lukeH
Obermatrose
1 / 14
Fishing Trawler build
Hi all built this robbe le courage a few years back and wanted to share a few pix...recently refitted👍 sails lovely and the trawl net and otter boards are a nice extra!
Gefällt von Northernflotsam and philcaretaker and
7 Kommentars
  • Mike StoneyKonteradmiral
    Hello Luke!
    Compliments, it looks fantastic. . .
    Lg Michel-C.
    Gefällt von lukeH and hermank
  • BruceMMatrose (Able Seaman)
    Superb refurb you have put my Deans Marine Tradition to shame.👍
    Gefällt von hermank and Mike Stoney and
Oxford-Dave
Leutnant (jun.)
Robbe W3 Police Boat video (video)
I bought this boat in reasonable condition five years ago from an estate sale. The original geared 540 brushed motors were rusted beyond repair, so I replaced them with a pair of 2830 1000kv brushless motors, running off a pair of 6 cell NiMH packs.
I use a transmitter mix to allow the model to rotate on the spot and perform scale-like docking manoeuvres.
Gefällt von Peejay and Ray and
1 Kommentar
  • RonaldFlottenadmiral
    Looks nice on the water and runs at a nice scale trot.
    Gefällt von Peejay and Oxford-Dave and
philcaretaker
Kommodore
3 "Robbe" Classic yachts
Just 3 "Robbe" Classic yachts here belonging to Buxton Model Boat member Barry Cook .
" Estelle " - " Windstar " & " Comtesse "
Gefällt von AndyB and Rookysailor and
3 Kommentars
  • AlannichollsPetty Officer 1st Class
    So lovely to see. I have a Comtesse that I bought 40 years ago, and still sail on the occasional weekends.👍
    Gefällt von philcaretaker
  • AlannichollsPetty Officer 1st Class
    Just checked. I have the Robbe Skandia. Lovely sailing boat.
    Gefällt von philcaretaker
philcaretaker
Kommodore
RC Sailing :- 9th June 2020
Out with the "Nippers" after lock down. Sailing - Wee Nips , Robbe Windstar & Century model yachts at Buxworth Basin - 9th June 2020.
Enjoy life - Enjoy your hobby ! .

👍Best wishes to all from Derbyshire !.
Gefällt von Joe727 and Rookysailor and
philcaretaker
Kommodore
1 / 3
Robbe WindStar
Robbe WindStar - owned and sailed by Barry who is a member of the Buxton Model Boat Club.
Listen to video commentary for more details .
Gefällt von peterd and Rookysailor and
1 Kommentar
  • philcaretakerKommodore
    Thanks for the advice Ken, I will pass on to Barry.
    I know Windstar sails like she is on rails under right conditions / sails and setup .
    With the Robbe brand name behind her, she has a real feeling of presence and quality on the water - wish she was mine !
    Phil
Smaragd
Petty Officer 1st Class
IRC 88 stock maritime (robbe sirius)
refitted Robbe Sirius IRC 88 (by stock maritime) completely new electronics and fittings, resprayed in 2k polyurethane topcoat
Gefällt von Donnieboy
GeoffA
Matrose (Able Seaman)
1 / 3
Moorcock
I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.
Gefällt von Brightwork and Inkoust and
1 Kommentar
  • ads90Warrant Officer
    You have made a vey fine job of her Sir - looks great on the water.
    Alan
    Gefällt von Inkoust and nick
Smaragd
Petty Officer 1st Class
1 / 7
Robbe Smaragd
Here's my Robbe smaragd, its about 30 years old and recently I have refitted some electronics. sailwinch replaced for the genua fore sail. it just did not function very well.
It sails like a beauty and very steady on coarse.
Gefällt von jbkiwi and TOWN3810 and
Smaragd
Petty Officer 1st Class
1 / 7
IRC 88 robbe sirius
here is my Robbe Sirius, the Stock maritime tuned version.
I traded an iphone 5c for this model.
it was in a used state without any working electronics.
Completely removed all electronics, stickers and rigg and started with sanding.
resprayed the hull in oyster 'pearl metalic' and started building up with new fittings , electronics etc
Sails like a beauty !
Gefällt von TOWN3810 and figtree7nts

Gefällt von

Wird geladen…

Delete this post?

Es wird von der Seite entfernt.

Diesen Entwurf verwerfen?

Ihr Entwurf wird gelöscht und kann nicht wiederhergestellt werden.

Sie haben einen unvollendeten Entwurf

Was möchten Sie damit tun?