Hafenverzeichnis
Haggy`s Boom Boat 1:22
Spezifikationen
- Bootslänge
- 5" (12.70 cm)
- Bootsgewicht
- 198g (7 oz)
- Motor-Typ
- Brushed
- Antriebstyp
- Direct
- Propeller
- Single
- Batterietyp
- LiIon
- Batterie mAh
- 284 mAh
- Propellertyp
- 314
Fotos
Über dieses Boot
Found the files for a BoomBoat on Thingiverse https://www.thingiverse.com/thing:4643858
Printer: Ender 3V2
Material: Light Grey Viking PLA
Motor: Speed 400 7.2V (Way to powerful, but it what was in the drawer)
ESC: 10A Chinese
Servo: 9g Chinese
Battery: 2S 1300ah LiPo
Length: 24cm
Width: 11.5cm
Height: 19cm
Weight: 700gram
Hull is 2 parts glued together with epoxy and reinforced with a strip of 24g FG and Z-poxy.
First trip to the water showed that I have to adjust the weight a bit to the stern as it digs down when mowing FWD (I know I should have thought about that)
Fun and cheap little boat.
Printer: Ender 3V2
Material: Light Grey Viking PLA
Motor: Speed 400 7.2V (Way to powerful, but it what was in the drawer)
ESC: 10A Chinese
Servo: 9g Chinese
Battery: 2S 1300ah LiPo
Length: 24cm
Width: 11.5cm
Height: 19cm
Weight: 700gram
Hull is 2 parts glued together with epoxy and reinforced with a strip of 24g FG and Z-poxy.
First trip to the water showed that I have to adjust the weight a bit to the stern as it digs down when mowing FWD (I know I should have thought about that)
Fun and cheap little boat.
Gefällt von
Wird geladen…
Kommentare
Anmelden zu kommentieren.
I have been looking for a figure to print , this looks like just what I want.
Will go an have a look at Cults.
Is the figure part of the download ?