Hafenverzeichnis

Graupner Glasgow paddle tug

Gelistet von Oxford-Dave ·

Spezifikationen

Bootslänge
35" (88.90 cm)
Motor-Typ
Brushed
Antriebstyp
257
Batterietyp
LiFe
Batterie mAh
288 mAh
Laufzeit
1+ hrs

Fotos

Über dieses Boot

This model is one I have wanted for years, but I thought I'd never find one after Graupner folded.
However, I found this on ebay and it was only a little over an hour's drove to collect it (I couldn't imagine the damage a courier would do to a boat this heavy & fragile).
On getting it home, I replaced the radio with one of my own, and took it to the Oxford Model Boat Club's regular Sunday morning meeting. It floated well and at the water line, and the paddles turned, but far too fast. The 6v lead acid battery was refusing to hold charge so it was replaced with a NiMH.
On checking the boat over when I got home I found it to be completely dry inside, which was a relief, and on checking the motor it was an MFA geared 540, with a ratio of 2.5:1 at the output shaft, which then drove the paddles through a further 3:1 geared reduction.
After a little thought, I drove over to my local model shop (Howes) and bought two more MFA geared 540s, one at 11:1 and the other at 6:1. I decided to fit the 11:1 first, and next time out with the new motor and a good 6 cell NiMH pack, the Glasgow performed perfectly. Much easier throttle control with the higher gearing. The boat makes headway even when the paddles are revolving so slowly that I can see each individual paddle.
The boat needs a bit of attention to the details, but that will be done over the winter.
Overall, it was worth waiting for, though I am sure I'd have appreciated had it fallen into my lap earlier.

Kommentare

  1. Oxford-Dave
    Leutnant (jun.)
    Phil H - the Glasgow is about one metre in length, but surprisingly heavy. I need to make a new stand for it as I am concerned that it will fall from the the current static display stand when I carry it to the lake.
    Gefällt von chugalone100
  2. Oxford-Dave
    Leutnant (jun.)
    Jumpugly - I haven't heard anything about the fate of the Graupner designs. I know that Krick has acquired some of the Robbe designs and are reissuing them under the Krick/Ro-Marin brand.
    I hope that someone can revive the Graupner boats as they were good models.
    Gefällt von chugalone100

Delete this post?

Es wird von der Seite entfernt.

Diesen Entwurf verwerfen?

Ihr Entwurf wird gelöscht und kann nicht wiederhergestellt werden.

Sie haben einen unvollendeten Entwurf

Was möchten Sie damit tun?