Hafenverzeichnis

Springer Tug

Gelistet von Nick Ward ·

Spezifikationen

Bootslänge
14" (35.56 cm)
Bootsgewicht
203g (7 oz)
Motor-Typ
Brushed
Antriebstyp
257
Propeller
Single
Max. Ampere
262A
Batterietyp
Lead Acid
Batterie mAh
286 mAh
Propellertyp
314
Propellergröße
330mm
Laufzeit
357 min
Modellgeschwindigkeit
363 km/h (225.6mph)

Fotos

Über dieses Boot

Built as a cheap-ish rescue boat driven by a planetary geared 540 sized motor off the Ali Express website, turning at 2300rpm max off 12volts, allowing it to turn a 50mm 4-bladed brass prop - plenty of pushing power!
Have had it chugging around for over 30mins while having a conversation with a local dog-walker about hobbies in general; thought it would have used a fair amount of the battery (2 x 1.3ah in parallel), but only around 500mah consumed. I guess those gears work well, as the motor seems to stay nice and cool!
The figures are cheap 1/18 scale (about right for this size of Springer Tug) 'Peacekeeper' soldiers from Toyworld, repainted to mimic a salvage crew. Bruder figures could also be an option, but they are very expensive here in NZ.

rgds,

Nick

Kommentare

  1. zoomaBronze
    Flottenadmiral
    Nice looking little pusher tug Nick.

    I am still “tempted” to build something for emergency recovery when I am alone and something gets stranded in the middle of the lake.

    ….but my first love is Classic Model Power Boats and I am tempted to try building a LesRos Sprite from the pdf you sent me (Will forwarded it to me as well!).

    If I can add a detectable from “pusher” to the punt nosed bows it could work as a recovery boat…………………?

    Bob.
  2. Madwelshman
    Korvettenkapitän
    That's a nice, and very handy little tug that Nick. Sounds like you have an amazing run time too.
    Will

Delete this post?

Es wird von der Seite entfernt.

Diesen Entwurf verwerfen?

Ihr Entwurf wird gelöscht und kann nicht wiederhergestellt werden.

Sie haben einen unvollendeten Entwurf

Was möchten Sie damit tun?