Westbourne is a Port of London Authority steam Tug from the Caldercraft Mini-Fleet Range - it is 1:48 scale. This model was discontinued a few years ago but I did manage to purchase a brand new boxed one via ebay a couple of years ago. it has taken me about 18 month to complete but only working off and on for some time until recently when I decided I needed to get a move on with it. The hull has limited access for the RC, batteries, steering servo and motor but I have managed to fit it in neatly with access to all parts, I have fitted batteries on both sides amidships in the hull acting as both ballast and stability. I have now run my tug on our club pond and she sits perfectly on the water and no other ballast required. I originally installed a geared motor at 2.5:1 and I thought that the tug was sailing a little faster than I wanted so I changed to my 6:1 setup but the speed and control was poor, so I went back to my original set up. On the whole I am very pleased at how she has turned out. Now started on my Northlight Clyde Puffer. (Motor: MFA) (ESC: Viper 15 Marine) (9/10)