Scratch built with mahogany planks on the club's mould. Glass cloth and fibreglass inside and protected with G4 polyurethane resin all over.
Uses a sail winch (Hitec) and travelling dolly for the two main sails and a separate arm servo for the foresails. Standard servo for the rudder. Power is from a 6.6v 1000mA LiFe battery. Taranis Tx using two sticks with the sail servos connected via an internal mixer to one stick.
Ballast is fixed to the keel with two studs which extend into the hull where a steel bar is attached between both and acts as a carrying handle. (Motor: Wind Sail Power) (9/10)