#2439

CaptLarry United States Basis

Chief Petty Officer 2. Klasse  · 378 Pkte Rowlett, Texas, Texas, United States Mitglied seit Mai 2013 Zuletzt online vor 5 Jahren

Signatur

73,
CaptLarry

CaptLarrys Hafen

4 Boots

CaptLarrys Baublogs

4 Blogs

Kürzliche Uploads

Neueste Aktivität

Zuletzt gepostet vor 6 Jahren
Build blog commentRe: One problem down one to goCash, They are somewhat, still a plaining hull is affected by propeller torque. It is a function of ascending and descending blade caused by pitch attitude, and direction of blade rotation. This is why runaway…2,166 viewsBuild blog commentRe: One problem down one to goOh by the way, that is with rudder amidships.....if you have very much freeboard, windage may affect the accuracy of your test.2,224 viewsBuild blog commentRe: One problem down one to goCash, Is your PT a single screw? If so, then your turning problem is related to propeller torque. Common on all displacement hull single screw vessels. You can test this at slow (idle) speed by putting it in f…2,222 viewsForum replyOther than boat building, what authors do you read?Nerys, In your pursuit of Seamanship, have you cracked the cover of “Chapman: Piloting and Seamanship”?722 viewsForum replyOther than boat building, what authors do you read?I am reading the series by Patrick O’Brian that centers around the Royal Navy about Nelson’s time. If you are not up to speed on square rigger terminology, and 1800’s sailor lingo it could be a difficult read.…735 viewsForum replyE poxy coating boat hull.Just a note: I have had good luck using the disposable foam brushes with epoxy and denatured alcohol, thereby eliminating having to pick out stray brush hairs. Foam holds up really good. Unless you want to mak…1,073 viewsForum replyE poxy coating boat hull.I have been doing the same thing....experimenting with airbrushing the final coat with a colored epoxy mix. Too thin, and it tends to run on a vertical surface.....soooo, viscosity and air pressure is the bala…1,122 viewsBuild blog commentRe: 39' Windboats Fairwind - planking and deckingWhat sort of stain did you use so that the glue would adhere on assembly? And type of glue.... Quite detailed.....very nice👍1,621 viewsForum replyYacht rigging help.😀😀😀912 viewsForum replyYacht rigging help.A simple blade keel with long fishing weights attached to the foot might work. A 90° bend at the hull attachment point, and through mounted to the hull. Fill edges with epoxy. Not scale looking, but functional.924 views

Delete this post?

Es wird von der Seite entfernt.

Diesen Entwurf verwerfen?

Ihr Entwurf wird gelöscht und kann nicht wiederhergestellt werden.

Sie haben einen unvollendeten Entwurf

Was möchten Sie damit tun?